Tire Size & Speedometer Calculator
Compare tire sizes, calculate diameter and circumference differences, and estimate how a tire change affects your speedometer and odometer.
Supported examples: 225/45R17, P205/55R16, LT265/70R17, 33×12.50R15.
Edit the tire sizes to update the comparison.
Enter valid tire sizes to view the comparison.
Tire dimensions
| Measurement | Current | Replacement | Difference |
|---|---|---|---|
| Nominal width | — | — | — |
| Sidewall height | — | — | — |
| Overall diameter | — | — | — |
| Circumference | — | — | — |
| Revolutions per mile | — | — | — |
Speedometer comparison
Estimated actual speed with the replacement tire, assuming the speedometer was calibrated for the current tire.
| Speedometer shows | Estimated actual speed | Difference |
|---|---|---|
| Enter valid tire sizes to calculate speed differences. | ||
These results use nominal tire-size geometry. Actual dimensions and rolling circumference vary with tire model, tread wear, inflation pressure, rim width, load, and speed. A diameter comparison cannot confirm vehicle fitment, clearance, load capacity, or legal compliance. Check your vehicle manufacturer’s approved sizes and the tire’s load index and speed rating before changing tires.
How to Compare Tire Sizes
This tire size calculator compares the nominal dimensions of your current tires with a replacement size. It estimates the difference in overall diameter, sidewall height, circumference, and revolutions per mile, then shows how the change may affect your speedometer and odometer.
How to Use the Tire Size Calculator
- Enter the size printed on the sidewall of your current tire, such as
225/45R17. - Enter the replacement tire size you want to compare.
- Choose the speed unit and enter the speedometer reading you want to check.
- Select a diameter comparison target, or enter a custom percentage.
- Review the dimensional comparison, estimated actual speed, and odometer impact.
How to Read a Tire Size
A metric tire size such as 225/45R17 contains three main measurements:
- 225: Nominal section width in millimeters.
- 45: Aspect ratio. The sidewall height is 45% of the nominal section width.
- R17: Radial construction and a 17-inch wheel rim diameter.
Flotation sizes such as 33x12.50R15 use a different convention: the first number represents nominal overall tire diameter in inches, the second represents nominal width in inches, and the final number is the rim diameter in inches.
Tire Size Formulas
For metric tire sizes, the calculator uses these nominal geometric formulas:
- Sidewall height (mm): Width × Aspect ratio ÷ 100
- Overall diameter (mm): Rim diameter (inches) × 25.4 + 2 × Sidewall height
- Circumference (mm): π × Overall diameter
- Revolutions per mile: 1,609,344 ÷ Circumference (mm)
- Diameter change (%): (Replacement diameter ÷ Current diameter − 1) × 100
How a Tire Change Affects Your Speedometer
The speedometer estimate assumes it was calibrated for the current tire size and that the tire’s effective rolling circumference changes in proportion to its nominal diameter.
Estimated actual speed:
Actual speed ≈ Displayed speed × Replacement diameter ÷ Current diameter
For example, changing from 225/45R17 to 245/40R18 increases nominal diameter by about 2.98%. If the speedometer displays 60 mph, the estimated actual speed is about 61.8 mph, assuming the original calibration was accurate.
How Tire Size Affects the Odometer
A larger tire generally travels farther per revolution. If the replacement tire has a larger nominal circumference than the original tire, the vehicle may travel farther than the odometer records. A smaller tire can have the opposite effect. The calculator estimates this difference using the ratio of the two nominal diameters.
What Does the Ground Clearance Change Mean?
The displayed ground clearance change is half the difference in nominal overall tire diameter, because the tire radius changes by half the diameter difference. It is a geometric estimate, not a guarantee of actual vehicle clearance or ride height under load.
What Does the Diameter Comparison Target Mean?
The ±2%, ±3%, ±5%, and custom options compare the calculated diameter difference with a user-selected reference range. They do not determine whether a tire is safe, legal, compatible with a wheel, or approved for a particular vehicle. Requirements vary by vehicle and jurisdiction.
Important Fitment Checks Before Changing Tires
- Check the vehicle owner’s manual or door placard for manufacturer-approved tire sizes.
- Confirm the wheel diameter and permitted rim-width range for the selected tire.
- Verify the required load index and speed rating.
- Check clearance around the suspension, brakes, and bodywork at full steering lock and under expected load.
- Consider changes to gearing, braking behavior, driver-assistance systems, and speedometer calibration.
- Use the tire manufacturer’s published dimensions when exact specifications matter.
Calculation Limitations
This tool calculates nominal dimensions from supported tire-size markings. It does not use manufacturer-specific measured rolling circumference, vehicle-specific calibration data, wheel-fitment databases, or regulatory approval information. Actual dimensions can vary with tire model, tread wear, inflation pressure, rim width, load, and speed.
Use the results for preliminary comparison only. Confirm fitment and safety with the vehicle manufacturer and a qualified tire professional before purchasing or installing a different tire size.
Frequently Asked Questions
How do I compare two tire sizes?
Enter the current tire size and the proposed replacement size. The calculator compares their nominal width, sidewall height, overall diameter, circumference, and revolutions per mile, then estimates the speedometer and odometer differences.
How does changing tire size affect speedometer accuracy?
If the speedometer was calibrated for the original tire, a larger replacement tire generally makes the vehicle travel faster than the displayed speed suggests. A smaller tire generally has the opposite effect. The calculator estimates this change from the nominal diameter ratio.
What does 225/45R17 mean?
The tire has a nominal section width of 225 mm, a sidewall height equal to 45% of that width, and a radial construction designation with a 17-inch rim diameter.
Can I compare metric and flotation tire sizes?
Yes. The calculator supports metric sizes such as 225/45R17 and flotation sizes such as 33×12.50R15. Flotation dimensions are interpreted from their nominal diameter, width, and rim-size markings.
What is the recommended tire diameter difference?
There is no single percentage that guarantees compatibility for every vehicle. The comparison target in this calculator is a reference only. Always check manufacturer-approved sizes, vehicle requirements, local regulations, and physical fitment.
Does a larger tire increase ground clearance?
A larger nominal diameter increases the tire radius, so the theoretical clearance change is half the diameter increase. Actual clearance depends on tire construction, suspension, vehicle geometry, load, and other fitment factors.
Will a different tire size affect my odometer?
It can. A larger tire generally covers more distance per revolution, so the odometer may record less distance than the vehicle actually travels. The calculator estimates the difference from the nominal diameter ratio.
Does this calculator guarantee that a tire will fit my vehicle?
No. It compares nominal dimensions only. It does not verify wheel-width compatibility, suspension or body clearance, load index, speed rating, brake clearance, or manufacturer approval. Confirm these details before fitting replacement tires.