3D Print Cost & Profit Calculator
Calculate the cost of 3D printing, estimate a selling price, and work out your potential profit. Include filament, electricity, printer depreciation, maintenance, labor, failed prints, and other expenses in your estimate.
How to Calculate 3D Printing Costs and Profit
How much does it really cost to make a 3D printed item? Filament is only part of the total expense. Electricity, printer wear, maintenance, labor, and failed prints also affect your costs.
This 3D print cost calculator helps you estimate production costs and potential profit. Enter your printing expenses, set a markup, and calculate a suggested selling price. You can use the results to price individual prints or plan customer orders.
How to Use the 3D Print Cost Calculator
Follow these steps to estimate the cost of your 3D printed items:
- Enter your filament details. Add the filament weight used for one print. Then enter the spool price and its usable weight. Include supports and purge material in your estimate.
- Set print time and quantity. Enter the estimated printing time for one piece. Then add the number of pieces in your order.
- Add electricity and printer costs. Enter average power consumption and your electricity rate per kWh. Also provide the printer price, expected lifetime, and maintenance cost per print hour.
- Include labor and extra expenses. Add your hands-on time per piece and hourly labor rate. Include packaging and other additional costs.
- Choose your pricing settings. Set a failure allowance and desired markup. You can also enter percentage-based selling or payment fees.
- Check your results. Review the production cost, suggested selling price, fees, and estimated profit. Use the cost breakdown to see where your money goes.
How Are 3D Printing Costs Calculated?
The calculator uses your inputs to estimate each part of the production cost. The main formulas are listed below. Use the same currency for all monetary values.
- Filament cost = (filament used in grams ÷ usable spool weight in grams) × spool price.
- Electricity cost = (average power in watts ÷ 1,000) × print hours × electricity price per kWh.
- Printer depreciation = (printer purchase price ÷ expected lifetime hours) × print hours.
- Maintenance cost = maintenance cost per print hour × print hours.
- Failure allowance = (material + electricity + depreciation + maintenance costs) × failure rate ÷ (100 − failure rate).
- Labor cost = (hands-on minutes ÷ 60) × hourly labor rate.
- Production cost per piece = material + electricity + depreciation + maintenance + failure allowance + labor + packaging and extras.
- Suggested selling price = production cost × (1 + markup rate) ÷ (1 − sales fee rate).
- Profit per piece = selling price − percentage-based sales fees − production cost.
Markup vs. Profit Margin: What’s the Difference?
Markup and profit margin both help you understand pricing. However, they use different starting points.
Markup compares profit with production cost. Profit margin compares profit with the final selling price.
For example, suppose one item costs $5.00 to produce. A 100% markup adds another $5.00, giving you a $10.00 selling price before fees. Your profit is $5.00, which equals a 50% profit margin.
Why Include Printer Depreciation?
Your 3D printer will not last forever. Its parts wear out, and you may eventually need to replace the machine. These costs should be considered when pricing items for sale.
Depreciation spreads the printer’s purchase price across its expected working hours. The calculator uses this estimate to assign a machine cost to each print.
Maintenance is a separate expense. It can include replacement nozzles, belts, build plates, and routine repairs. Enter your estimated maintenance cost per printing hour to include it in the calculation.
How Failed Prints Affect Your Costs
Not every print succeeds. A failed job can waste filament, electricity, and valuable printer time. These expenses still affect the cost of the items you successfully produce.
The failure allowance helps account for these losses. It applies to material, electricity, depreciation, and maintenance costs. It does not automatically increase labor or packaging expenses.
If failed prints also require extra hands-on work or materials, include those expenses in your own estimates.
Use Your Slicer for Better Cost Estimates
Your slicer is a useful source of printing estimates. Check the final sliced job before entering your values.
Use its estimated filament weight and print duration. Remember to include supports, purge material, and other filament the job will consume.
For electricity costs, use measured average power consumption when possible. A printer’s maximum rated wattage may be higher than its actual power use during a typical print.
Important Limitations of This 3D Printing Cost Calculator
The calculator provides estimates based on the information you enter. Keep these limitations in mind:
- Manual inputs: The tool does not import STL, 3MF, or G-code files. It also cannot measure your printer’s actual power consumption.
- Estimated print failures: The failure allowance uses your chosen percentage. It does not predict whether a specific print will fail.
- Labor and packaging: These are treated as per-piece expenses. For batch orders, divide shared setup time across the pieces before entering the labor cost per item.
- Additional overhead: Fixed transaction fees, taxes, shipping, design time, and rent are not automatically included. Account for them separately when needed.
- Variable selling fees: Marketplace and payment fees depend on the platform, country, and transaction type. Enter the correct percentage and account for any fixed charges separately.
Frequently Asked Questions
How do I calculate the cost of a 3D print?
Start with the filament cost. Then add electricity, printer wear, and maintenance. Include labor, packaging, and failed prints too. Use your slicer’s estimates to get a more accurate result.
How much should I charge for a 3D printed item?
First, calculate your total production cost. Next, add your desired markup and selling fees. Remember to consider taxes and shipping. Check similar products to see if your price is competitive.
What is the difference between markup and profit margin?
Markup is based on production cost. Profit margin is based on the selling price. For example, a 100% markup on a $5 item gives you a $10 selling price. Your profit margin is 50% before fees.
How do I calculate electricity cost for a 3D printer?
Multiply the printer’s average power by its print time. Then multiply the result by your electricity rate. For example, a 120-watt printer running for 3 hours uses about 0.36 kWh.
Should I include printer depreciation in my print price?
Yes, especially if you sell your prints. A printer loses value as you use it. Depreciation spreads its purchase cost across its expected working hours. This helps you plan for future replacement costs.
Does this calculator include failed prints and marketplace fees?
Yes. You can enter a failure allowance and percentage-based selling fees. However, fixed transaction fees and taxes are not included. Add these costs separately when setting your final price.
Can I use this calculator for resin 3D printing?
This calculator is mainly designed for filament printing. Resin printing has extra costs, such as washing and curing supplies. These expenses may not be fully covered by the calculator.