Calculators

BPM to Milliseconds Calculator

Convert BPM to milliseconds per beat and calculate straight, dotted, and triplet note timings for music production, delay effects, and tempo-synced workflows.

BPM to Milliseconds Note Timing Table Dotted & Triplet Values Copyable Results

Enter a positive tempo.

Select a common reference tempo.

Quarter note (1 beat) 500 ms
Seconds per beat 0.500 s
Beat frequency 2 Hz
Formula Milliseconds per beat = 60,000 ÷ BPM

60,000 ÷ 120 = 500 ms

Note timing table

Values update when you change the tempo.

Note durations in milliseconds at the selected BPM
NoteStraightDottedTriplet
Quarter note (1/4)500 ms750 ms333.333 ms

Milliseconds to BPM

Estimate the tempo from a known note duration.

Calculated tempo 120 BPM

The selected note value is used to infer the quarter-note BPM.

How to Convert BPM to Milliseconds

A BPM to milliseconds calculator converts a musical tempo into the time between beats. BPM stands for beats per minute, while milliseconds (ms) measure how long a beat or rhythmic subdivision lasts. This conversion is useful when setting delay times, reverb pre-delay, rhythmic modulation, and other tempo-related values in music production.

The BPM to Milliseconds Formula

For this calculator, one beat is treated as a quarter note. Since one minute contains 60,000 milliseconds, divide 60,000 by the tempo to find the duration of one quarter-note beat.

Milliseconds per beat = 60,000 ÷ BPM

For example, at 120 BPM:

60,000 ÷ 120 = 500 ms

One quarter-note beat therefore lasts 500 milliseconds, or 0.5 seconds. At a higher BPM, each beat is shorter; at a lower BPM, each beat is longer.

How to Use the Calculator

  1. Enter your song or project tempo in the BPM field, or choose a quick tempo preset.
  2. Read the quarter-note duration, seconds per beat, and beat frequency in the summary.
  3. Use the timing table to compare straight, dotted, and triplet note durations.
  4. Select Copy table to copy the timing values into a spreadsheet or another application.
  5. To estimate BPM from a known duration, enter the duration in milliseconds and choose the note value it represents.

Common BPM to Milliseconds Examples

The following examples show the duration of one quarter-note beat at several tempos.

Quarter-note beat duration at common tempos
TempoMilliseconds per beatSeconds per beat
60 BPM1,000 ms1 s
90 BPM666.667 ms0.667 s
100 BPM600 ms0.6 s
120 BPM500 ms0.5 s
128 BPM468.75 ms0.469 s
140 BPM428.571 ms0.429 s

Straight, Dotted, and Triplet Note Values

Once you know the duration of a quarter note, you can calculate shorter and longer note values by multiplying it by the appropriate fraction or multiple. This calculator uses the following relationships for each displayed note value.

  • Straight: the standard duration of the selected note.
  • Dotted: 1.5 times the straight duration. A dot adds half the note’s original value.
  • Triplet: two-thirds of the corresponding straight duration. A triplet divides the time normally occupied by two notes of that value into three equal parts.

For example, at 120 BPM, a quarter note lasts 500 ms. An eighth note lasts 250 ms, a dotted eighth lasts 375 ms, and an eighth-note triplet lasts approximately 166.667 ms.

Using BPM to Calculate Delay Time

Tempo-based delay settings can help repeated echoes follow the rhythm of a track. At 120 BPM, a straight eighth-note delay corresponds to 250 ms, while a dotted eighth-note delay corresponds to 375 ms. A triplet subdivision produces a different rhythmic spacing.

Use the note duration that matches the rhythm you want. The calculated value is a mathematical timing reference, not a guarantee that a particular delay or reverb setting will sound best in every mix. Adjust the effect by ear and check the units and timing options supported by your device or plugin.

Converting Milliseconds Back to BPM

If you know the duration of a note in milliseconds, you can estimate the underlying quarter-note tempo by selecting the note value that the duration represents.

BPM = (60,000 × note factor) ÷ duration in milliseconds

The note factor is 1 for a quarter note, 0.5 for an eighth note, 0.25 for a sixteenth note, 2 for a half note, and 4 for a whole note. For example, 500 ms as a quarter note corresponds to 120 BPM. A 250 ms eighth note also corresponds to 120 BPM when its note value is selected correctly.

Assumptions and Limitations

  • The calculator treats BPM as quarter-note beats per minute.
  • The timing table displays whole, half, quarter, eighth, sixteenth, thirty-second, and sixty-fourth notes, including dotted and triplet variations.
  • Displayed results are rounded to a maximum of three decimal places. Calculations use the underlying numeric values before display rounding.
  • The calculator does not detect tempo from audio, listen to a song, or measure a live performance.
  • Swing, groove, tempo changes, and time-signature-specific phrasing are not modeled.
  • The reverse calculator requires the correct note value. A duration alone does not identify whether it represents a quarter note, eighth note, dotted note, or triplet.
  • Some DAWs and plugins provide their own tempo-sync options or use different timing conventions. Check the relevant device documentation before entering values.

Frequently Asked Questions

How do you convert BPM to milliseconds?

For a quarter-note beat, divide 60,000 by BPM. For example, 120 BPM equals 500 milliseconds per beat because 60,000 ÷ 120 = 500.

How many milliseconds is 120 BPM?

At 120 BPM, one quarter-note beat lasts 500 ms, or 0.5 seconds. An eighth note lasts 250 ms, a dotted eighth lasts 375 ms, and an eighth-note triplet lasts about 166.667 ms.

What is the formula for milliseconds per beat?

The formula is milliseconds per beat = 60,000 ÷ BPM, assuming one beat is a quarter note. Multiply the result by the selected note’s factor to calculate other note durations.

How many milliseconds is 100 BPM?

At 100 BPM, one quarter-note beat lasts 600 ms, or 0.6 seconds. The duration of shorter or longer notes depends on their rhythmic value.

What is the difference between straight, dotted, and triplet timing?

A straight note uses its standard duration. A dotted note lasts 1.5 times as long, while a triplet note in this calculator lasts two-thirds of the corresponding straight note’s duration.

How do I calculate a dotted eighth-note delay?

First calculate the quarter-note duration, then multiply it by 0.75. At 120 BPM, a quarter note is 500 ms, so a dotted eighth note lasts 375 ms.

How do I convert milliseconds back to BPM?

Choose the note value represented by the duration and calculate BPM = (60,000 × note factor) ÷ milliseconds. For a 500 ms quarter note, the result is 120 BPM. Selecting the correct note value is essential.

Can I use this calculator for delay and reverb settings?

Yes. Use the calculated note durations as timing references for delay repeats, reverb pre-delay, and other tempo-related effects. The best setting still depends on the sound, mix, and controls available in your audio software or hardware.

Does the calculator detect BPM from an audio file?

No. This tool calculates timing from a BPM value you enter. It does not upload, analyze, or listen to audio to detect a song’s tempo.

Does this calculator account for swing or changing tempo?

No. It uses a constant tempo and a regular note grid. Swing, groove, and tempo changes can alter the actual timing feel and are not included in these calculations.